Date: Sun, 15 Apr 2001 12:52:09 GMT
From: microwave@clix.pt
Subject: [sarex] Packets commands

Hi, 

A command that will help a lot to display ISS packet
activity is "passall", if available.It permits to 
display packets with invalids CRC fields.

Set passall "on" will of course disable
the "error free" feature of packet, be carefull
when reading a strange callsign!
Note also that you may loose the "MHEARD" function in this
mode,but the improvement is really great.

You may also check the "reject callsign" feature of your 
packet program.Some have by default the "NOCALL" ,so any 
packet whith NOCALL will not be displayed-kind of boring 
with ISS  :-) (Cmd is LCALL on MFJ tncīs)

Good luck , 
73,
Fred, CU8AO
Flores Is.



- ----
Via the sarex mailing list at AMSAT.ORG courtesy of AMSAT-NA.